Mitsubishi

Delta, 7 in TFT LCD Touch Screen HMI for conversion of E600 display

admin — Sun, 18 Feb 2018 09:55:39 +0000

Display Type	TFT LCD
Display Size	7 in
Display Resolution	800 x 480pixels
Display Colour	Colour
Number of Ports	3
Port Type	COM
Onboard Memory	128 MB
Backlighting	Yes
Supply Voltage	24 V dc
Length	215mm
IP Rating	IP65
Dimensions	215 x 161 x 50 mm
Maximum Operating Temperature	+50°C
Width	161mm
Depth	50mm
Minimum Operating Temperature	0°C

Product Enquiry

Mitsubishi 5.7 inch Display HMI

admin — Sat, 30 Dec 2017 07:20:52 +0000

Type	HMI
Sub Type	DC Type
Screen Size	5.7 inch
Screen Type	STN color LCD
Communication Interface	RS-422/485, RS-232, USB, Memory Board
Graphic Standard	QVGA
Resolution	320×240
Operating Ambient Humidity	10 to 90%RH, no condensation
Protection Class	IP 67f
Flash Memory	3 MB or less built-in Flash Memory
Applicable Software Package	GT Works3 Version1.54G or later
Rated Input Power Supply	24V DC (+10%, -15%)
Battery Type	GT11-50BAT lithium battery
Touch Panel Type	Matrix resistive type

E600 HMI Display

admin — Fri, 29 Dec 2017 18:59:45 +0000

Graphic operator terminal 5.4 inch screen, 240 x 128 pixel displayMitsubishi Backlit LCD HMI Terminal, Membrane Keyboard, 16 Lines x 40 Characters Display, 24 V dc Supply

2 ports
24Vdc supply voltage (450mA)
Dimensions: H 232 x W 214 x D 69mm

Application Memory Size	Buzzer	Fieldbus Support		Network Support
		CC-Link	Profi DP, AB Control Logic, DH485
256Kb	Yes	Yes	Yes	TCP/IP; Multi-drop (485)

E600

Mitsubishi – PLC

admin — Fri, 29 Dec 2017 17:34:11 +0000

Specifications

MITSUBISHI FX1N FX1S FX2N FX3U FX3G PLC,S

With their compact dimensions and low cost compact controllers have opened up new perspectives in industrial automation. Many applications for which automation was once not even an option can now benefit from the many advantages of these controllers.

FX2N extension module, function module is still in normal sale. In Addition: Now Mitsubishi PLC products FX1S,FX1N,FX1N Series have stopped production,therefore they become obsolete models when you need them, but their succeed series is FX3SA,FX3GA,FX3U. they are totally have the same functions.

Mitsubishi FR-E700 2.2kW 230V 1ph to 3ph – AC Inverter Drive Speed Controller

admin — Thu, 28 Dec 2017 13:19:34 +0000

Mitsubishi FR-E700 Series AC Frequency Inverter for 2.2kW (3HP) 3 Phase motor in VxF or Sensorless Vector control to 11A. Simple set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.

Size 3C – 140mm Wide x 155.5mm Deep x 150mm High. IP20

Overload – 150% x 60 seconds, 200% x 3 seconds
Speed Control Range – 0.2Hz to 400Hz
Braking – To 60 Ohm minimum external resistor (not supplied) – use the Which Resistor button on this page.

2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact Sets, Modbus RTU, integrated USB port.
Input Current – 22.6A.
Input Voltage – 200-240V Single Phase +10% -15% at 50/60Hz &plusmn
EMC Filters – Not included (see linked products below for external EMC filter module)

Wall mount in clean environment or cubicle mount.
Rated -10° to 50°C Ambient.
Ventilation space in front – 10mm
Ventilation space above and below – 100mm.
Ventilation space at sides – 0mm (10mm when surrounding air temperature exceeds 40°C).
Mounting via 4 x 5mm diameter holes at rear on 128mm x 138mm centres.

Mitsubishi E500 Series – 1.5kW 230V 1ph to 3ph AC Inverter Drive Speed Controller

admin — Thu, 28 Dec 2017 13:13:51 +0000

Limited Production – Mitsubishi Automation E500 Series AC Frequency Inverter and keypad for 1.5kW (2HP) 230V 3 Ph motor in VxF or Vector control to 8A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.

140mm Wide x 156mm Deep x 140mm high in IP20 case.

Overload – 150% x 60 Seconds and 200% for 0.5 seconds.
Speed Control Range – 0.2/400Hz.

Features – 2 x Analogue Inputs (1 x Voltage & 1 x Current), 7 Digital Inputs, 2 Analogue outputs, 1 Relay c/o Contact set and 3 digital outputs.
Programmable from the on board keypad.
EMC Filters – not included.

Input load – 4.5kVA.
Input Voltage – 200-240V single phase -15%, +10% at 50/60Hz +/- 5%.

Cubicle or enclosure mounting.
Rated at 50C Ambient.
Ventilation space above and below – 50mm.
Ventilation space at sides – 50mm.
Heat Loss at max output – XXW.
Mounting via 4 x 5mm holes on 128mm wide x 138mm high centres for rear mounting.

This has been replaced by the FR-E720S-080-EC, the wiring and nearly all the parameters are the same. The new drive will also run in open loop flux vector mode, which the S500 did not support, hence you will be getting a better drive. Some of the frame sizes of the old S500 range are still available on significant lead times.