Mitsubishi FR-E700 Series AC Frequency Inverter for 2.2kW (3HP) 3 Phase motor in VxF or Sensorless Vector control to 11A. Simple set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Size 3C – 140mm Wide x 155.5mm Deep x 150mm High. IP20
Overload – 150% x 60 seconds, 200% x 3 seconds
Speed Control Range – 0.2Hz to 400Hz
Braking – To 60 Ohm minimum external resistor (not supplied) – use the Which Resistor button on this page.
2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact Sets, Modbus RTU, integrated USB port.
Input Current – 22.6A.
Input Voltage – 200-240V Single Phase +10% -15% at 50/60Hz &plusmn
EMC Filters – Not included (see linked products below for external EMC filter module)
Wall mount in clean environment or cubicle mount.
Rated -10&deg; to 50&deg;C Ambient.
Ventilation space in front – 10mm
Ventilation space above and below – 100mm.
Ventilation space at sides – 0mm (10mm when surrounding air temperature exceeds 40&deg;C).
Mounting via 4 x 5mm diameter holes at rear on 128mm x 138mm centres.